« Pads installed | Main | Modified helmet for R3 »

June 08, 2005

Bedding EBC RedStuff Ceramic Pads

It is with much relief that the bedding procedure for these can be done legally. Basically, accelerate to 60mph and then use brakes to slow to 15 and then accelerate again. Repeat 10 times increases pressure. The brakes should be bedded at this point. Repeat if not satisfied with the performance after the procedure.

I had thought it would be some manic procedure involving burning up the rotors or decelerating from 100mph etc.

So, nice and easy.

June 8, 2005 | Permalink

Comments

Post a comment